ROM Feeders Australia: Size the Feed Before the Crusher

November 4, 2026

Run-of-mine feeder equipment

Match ROM feeders in Australia to your lump size, moisture and crusher duty before you specify. Enquire with Hawk Machinery.

Crusher performance starts before rock reaches the chamber, and ROM feeders in Australia have to cope with variable lump size, fines and loading impacts while delivering a steady feed. This article covers what to settle before you specify one.

What Should You Check Before Choosing ROM Feeders in Australia?

Start with the real feed, not an ideal average. Maximum lump size, bulk density, moisture, clay content and required tonnes per hour all affect pan size, drive arrangement and grizzly opening. Those inputs show whether a vibrating pan feeder or a vibrating grizzly feeder suits the duty. Choosing from a single peak figure is a common mistake, because a feeder sized for the best day can struggle on the worst one.

The feeder also has to suit the receiving hopper, the crusher inlet and the conveyor capacity downstream. A restricted opening can limit output, while over-delivery can choke the crusher or overload the conveyor. Good matching supports steadier operation, but it cannot make up for poor blasting, uncontrolled stockpiles or missed inspections. Our earlier article on run-of-mine feeders and mining productivity looks at material flow in more detail.

Feed Data to Gather Before You Request a Quote

The more site data you have, the more useful the feeder assessment will be. Gather the following before you contact us:

  • Feed gradation: Record the expected top size, typical lump size and the share of fines.
  • Capacity range: Set normal and peak tonnes per hour for the whole circuit.
  • Material behaviour: Note moisture, stickiness, abrasiveness, bulk density and likely clay content.
  • Installation layout: Check hopper geometry, headroom, support points and discharge height.
  • Maintenance access: Leave room to inspect liners, grizzly bars, bearings and drive components.
  • Hopper and loading method: Note how material is delivered to the feeder, because loading impacts and surge affect the duty.

How Do Grizzly Feeders Separate Fines Before Crushing?

A vibrating grizzly feeder does not crush rock. Material smaller than the bar opening falls through, and larger material carries on to the primary crusher. That keeps fines out of the crusher and gives it a more suitable feed. When comparing ROM feeders in Australia, check the opening against the crusher inlet, target throughput and how much the feed varies.

On our extra heavy duty (XHF) grizzly feeders, the grizzly bars have an adjustable gap and wear resistant liners protect the areas exposed to rock. Totally enclosed dust sealing arrangements are available on our XHF and Hi-Feed grizzly feeders. Plant risk controls should also reflect the Safe Work Australia model code of practice for managing risks of plant, which applies to anyone who manages, installs or commissions plant. Mine and quarry sites may also have state-specific requirements, so confirm what applies to your site.

Specify a Feeder Around Your Verified Material Data

Our feeder range includes Brute Force vibrating pan feeders, Hi-Feed vibrating grizzly feeders and extra heavy duty vibrating grizzly feeders, all manufactured in Melbourne. Listed sizes are indicative only, and custom sizes are available. Dust control is worth raising early, as the frame of a Brute Force pan feeder can include a dust sealing arrangement.

The right choice among ROM feeders in Australia depends on your own feed gradation and circuit requirements, not a headline capacity figure. Contact Hawk Machinery with your feed data and discuss a suitable configuration for your project.